WOJET Limpiador de superficies de lavadora a presión de 20 ", accesorio de lavadora eléctrica de acero inoxidable de 4500 Psi para limpieza de entradas PA7605

It is compatible with most electric or gas pressure washers that meet the requirements of 2000–4500 PSI and 2–4 GPM. It works perfectly with heavy-duty machines like the Honda GX390 (4200 PSI / 4.0 GPM) and 4400 PSI units. It can also be used with a 3000 PSI / 2.8 GPM washer, but you may notice slightly slower rotation of the bar.

It features a 20-inch cleaning width, with overall product dimensions measuring 20"L x 20"W x 63"H. The item weighs 27 Pounds, reflecting its heavy-duty stainless steel construction. The package includes a 63-inch high-pressure hose equipped with a 3/8" Quick-Connect fitting.

The main body is constructed using heavy-duty stainless steel for maximum durability and resistance to rust and corrosion, combined with brass internal components. It features a 3/8" male Quick-Connect plug on the handle.

This model features a fully sealed, maintenance-free swivel that is pre-greased at the factory. It does not have a grease fitting (Zerk), and you do not need to grease it manually. This design prevents debris from entering the swivel mechanism and ensures long-term, hassle-free operation.

It is equipped with two high-pressure spinning nozzles made of stainless steel. These nozzles are specifically designed to create a wide, streak-free cleaning path. The unit comes pre-installed with 25020 nozzles, which are optimized for the product's maximum flow rate of 4 GPM.

It works effectively on a wide range of surfaces including concrete, brick, wood decks, tile, pool siding, and sport courts. It is also safe for use on epoxy flooring when used with appropriate pressure settings. Its commercial-grade build and large 20-inch width make it ideal for cleaning large outdoor areas efficiently.

The unit comes pre-installed with 25020 nozzles. The package includes 2 extra 25020 nozzles and 2 extra 25030 nozzles for replacement. The 25020 nozzles are the correct choice for standard use with 2-4 GPM machines. If you are using a machine with a flow rate significantly higher than 4 GPM, you will need to install the appropriate high-flow nozzles (like the included 25030) to prevent damage.

You cannot connect it directly to a 1/4" Flexzilla hose or a 1/2" hose. You will need to purchase a separate adapter. For a 1/4" hose, you need a 3/8" female to 1/4" male adapter. For a 1/2" connection, you need a corresponding 3/8" to 1/2" adapter. Always ensure you are using a high-pressure hose, not a regular garden hose.

Assembly is simple and takes only a few minutes with the included instructions and tools. If the bar is spinning slowly, it is usually due to a low flow rate (your machine may be under 2 GPM) or clogged nozzles. Try cleaning the nozzles with the included cleaning tool or check that your pressure washer is outputting the correct GPM.

The nozzle bar uses standard 1/4" threads, which are compatible with most standard pressure washer nozzles available on the market.

Yes, this surface cleaner is designed to be compatible with hot water pressure washers, with a maximum temperature tolerance of 300°F.

"Yes, the WOJET 20"" Pressure Washer Surface Cleaner is specifically designed for wooden decks. The product description explicitly mentions it's ideal for ""decks"" and can efficiently clean ""wood"" surfaces along with concrete, brick, and tile.

The dual high-pressure water jets deliver commercial-grade cleaning while the no-stripe design ensures even coverage on wooden deck surfaces."

The item is 3/8-inch quick connect inlet male plug. You need an extra connect adapter while using it. Which kind of 1/2" connection is your pressure washer? Could you please send the picture to us? WOJET will provide the most professional solutions.